RISON TITANIUM M4 x 0.7mm Fully Threaded Tapered Hex Bolts | Grade 5 Ti-6Al-4V | 5Pcs

🔩 **RISON TITANIUM M4 x 0.7mm Fully Threaded Tapered Bolts | Grade 5 Ti-6Al-4V | 5Pcs**

📏 **WHAT IS THIS PRODUCT?**
Precision CNC machined from aerospace-grade Ti-6Al-4V (GR5) titanium. Fully threaded design for lengths 6mm to 20mm. Tapered head pulls flush into countersunk recesses, providing a clean, snag‑free surface and superior vibration resistance. Ideal for RC cars, 3D printers, drones, bike computer mounts, and motorcycle instrument panel screws.

⚙️ **SPECIFICATIONS**
• Material: Grade 5 Ti-6Al-4V (GR5 / TC4) Aerospace Titanium
• Thread: M4 x 0.7mm
• Thread Type: Fully Threaded (entire length is threaded)
• Lengths Available: 6mm, 8mm, 10mm, 12mm, 15mm, 20mm
• Head Style: Tapered (countersunk compatible)
• Head Diameter: Φ7mm
• Head Height: 4mm
• Drive: 3mm Hex (Allen key)
• Tensile Strength: ≥900 MPa (130,000 psi)
• Weight: 45% lighter than steel
• Corrosion Resistance: 100% rustproof – immune to road salt, sweat, moisture

🎨 **11 SIGNATURE COLORS**
🔘 Titanium Raw: Clean, polished natural titanium.
🛡️ PVD Coating: Black, Gold, Rainbow, Burnt Blue – super-hard, scratch and fade resistant.
🌈 Anodized: Green, Purple, Blue, Candy, Lake Blue, Blue Purple – vivid electrolytic finish.

🎯 **WHERE TO USE**
🔹 RC car chassis screws
🔹 3D printer heat bed leveling screws
🔹 FPV drone frame fasteners
🔹 Bicycle computer mounts
🔹 Motorcycle instrument panel screws
🔹 Small electronics enclosures

💪 **WHY CHOOSE THESE BOLTS?**
✅ Aerospace Grade 5 Titanium – same alloy used in aircraft and racing
✅ 45% lighter than steel – reduce unsprung mass
✅ 950 MPa tensile strength – no stripping or snapping
✅ Tapered head – self-centering, flush fit, reduces stress risers
✅ 11 exclusive finishes – match your build style
✅ Never rust – goodbye seized hardware

🔧 **INSTALLATION TIPS**
• Apply anti-seize or assembly grease to threads before installation – dry titanium will gall and seize
• Torque to 2.5-3.5 N·m (use calibrated torque wrench)
• Always follow component manufacturer’s torque specification
• Confirm M4 x 0.7mm thread pitch before ordering