RISON TITANIUM GR5 Titanium Round Bar | Ti-6Al-4V Aerospace Bar Stock

∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers

Product Description

🔩 **RISON TITANIUM GR5 Titanium Round Bar | Ti-6Al-4V Aerospace Alloy | ASTM B348**

📏 **What is this product?**
Precision manufactured Grade 5 Titanium (Ti-6Al-4V / TC4) round bar. The most widely used titanium alloy worldwide – combining high strength, low density (60% of steel), excellent corrosion resistance, and good fabricability. Diameters from Φ6mm to Φ40mm, custom lengths available.

🔬 **Chemical Composition (wt%)**
Ti (balance), Al 5.5-6.75, V 3.5-4.5, Fe ≤0.30, O ≤0.20, C ≤0.08, N ≤0.05, H ≤0.015

✅ **Key Properties**
• 60% density of steel with comparable tensile strength – ideal for weight-critical parts
• Immune to saltwater, acids, alkalis – no rust ever
• Maintains strength up to 400°C, retains toughness down to -200°C
• Biocompatible, non-toxic – suitable for medical devices

🎯 **Applications**
✈️ Aerospace: structural frames, landing gear, engine mounts, hydraulic tubing
🏍️ Automotive/Motorsport: connecting rods (30-40% lighter), valves, suspension parts
🏁 Motorcycle: exhaust systems, rearsets, triple clamps, axles, engine guards
🚲 Bicycle: custom frames, seat posts, handlebars, crank arms, pedal axles
🦾 Robotics/UAV: drone arms, robot joints, chassis plates, linkage rods
🏭 Industrial: shafts, pumps, marine hardware, chemical equipment, oil & gas tools

🔧 **Machining Guide (Ti-6Al-4V is “difficult-to-machine”)**
• Cutting speed: 25-60 m/min (carbide tools, avoid HSS)
• Feed rate: 0.10-0.25 mm/rev (roughing), 0.05-0.15 mm/rev (finishing)
• Depth of cut: ≥0.5mm (avoid light cuts that cause work hardening)
• Drilling: 10-15 m/min, peck drill for depths >3× diameter
• Tapping: 3-5 m/min, use thread forming taps if possible
• Coolant: High-pressure water-soluble (5-10%) – mandatory. Never use chlorinated fluids
• Tip: Maintain rigid setup, use sharp edges, avoid dwelling

🛡️ **Surface Finish Options** (upon request)
Natural mill finish (peeled/turned) | Centerless ground (h8/h9) | Polished/bright | Anodized | Pickled

📏 **Available Sizes
Diameter: Φ6mm – Φ300mm | Standard lengths: 1000mm, 2000mm, 3000mm (custom shearing available)
Surface: Peeled (standard), ground, polished, hot-rolled black skin

💡 **Why RISON TITANIUM?**
Aerospace certified | Full traceability with MTR | Factory direct pricing | Precision consistency | Worldwide shipping

⚠️ **Galling Prevention**
When machining or threading titanium, use anti-seize or heavy cutting oil. Dry titanium-on-titanium contact causes galling that can lock parts permanently.

📦 **Packaging:**5pcs Grade 5 Titanium (Ti-6Al-4V / TC4) round bar

🏭 **Factory direct | 100% authentic TC4 | ASTM certified | ISO9001**

📧 For custom diameters/lengths or quantity pricing, contact our sales team.